Material Grade Guide Table

7tiger's table guide is based on actual test result from accredited testing Lab in Philippines

• SCM440 test data diameter - 12mm to 40mm
• SCM440 test data item type - Raw Material for anchor bolt

Note:
- Data sheet and material guide table (based on actual result) may have wide range of result outcome compared to theoretical values due to physical setting consistency in each testing lab.
- Slippage of clamp during tensile testing may greatly affect tensile and yield strength output. This may occur during actual pull-out test especially in galvanized raw materials.
- Some testing lab's tensile machine has maximum capacity that is below SCM440 ultimate strength.

View Sample Actual Test Result

---

7TMW's SCM440 Equivalent Grade Guide - mechanical properties

Material Grade	Specification	Mechanical Properties
		Tensile Strength		Yield Strength
		Mpa	Ksi	Mpa	Ksi
SCM440	JIS SCM440	719 - 1051	104 - 152	380 - 854	55 - 124
A325	ASTM F3125	724 - 827	105 - 120	558 - 634	81 - 92
G8.8	ISO 898–1	800 - 830	116 - 120	640 - 660	92 - 96
B7	AISI 4140/4142	689 - 862	100 - 125	517 - 723	75 - 105
Grade 5	SAE J429	703 - 827	105 - 120	489 - 634	81 - 92
Grade 80	ASTM A615 / Deformed Bar	724	105	552	80

---

7TMW's S45C Equivalent Grade Guide - mechanical properties

Material Grade	Specification	Mechanical Properties
		Tensile Strength		Yield Strength
		Mpa	Ksi	Mpa	Ksi
S45C	JIS G4051	485 - 751	70 - 109	326 - 470	47 - 68
A307	ASTM A307 Grade A	413	60	248	36
Grade 36	ASTM F1554	399 - 551	58 - 80	248	36
A36	ASTM A36	399 - 551	58 - 80	248	36
Grade 2	SAE J429	413 - 510	60 - 74	248 - 393	36 - 57
G4.8	ASTM F568M	420	60	340	49
G5.8	ASTM F568M	520	75	420	60
Grade 40	ASTM A615 / Deformed Bar	414	60	276	40
Grade 60	ASTM A615 / Deformed Bar	620	90	414	60
Q235	GB/T 700	370 - 500	54 - 73	225	33